Plating Process Wastewater Treatment Facilities
Corrosion-resistant plating processes are utilized for a wide number of industrial and decorative purposes, but levels of heavy metals, hazardous substances and other such substances in wastewater generated must be suppressed until they conform to applicable standards.
Treatment of wastewater containing chelating agents in particular requires advanced technology and equipment.
NCE has experience of developing and providing a large number of water treatment equipment for wastewater from electroless plating, electroplating and other such processes.
Components of Plating Process Wastewater Treatment Facilities
The following equipment is used to treat wastewater from plating operations.
This equipment is used in inorganic wastewater treatment.
Heavy metals, suspended solids (SS), colloidal substances and other substances contained in the wastewater are neutralized and then quickly separated and precipitated out.
Rapid Filtration Towers
This equipment provides supernatant filtration and removal of solid matter, suspended particles and so forth via rapid filtration.
The upper filter media can efficiently remove everything from large particles to small suspended solids (SS).
Activated Carbon Adsorption Towers
Even after passing wastewater through flocculation and sedimentation treatment and filtering it, trace colors, odors and quantities of organic compounds will remain.
Activated carbon adsorption towers can be used for secondary treatment.BOD and COD reduction are also possible.
Fully Automated Compression Filter Presses
This fully automated compression filter press equipment removes water from the slurry mixture.
It is designed to handle difficult-to-filter slurry, and the resulting filter cake can be reliable removed using a removal device.